Product Overview
The Tattu Pro Max 22000mAh 14S1P 53.2V HV 25C Smart UAV LiPo Battery with AS150U-F Plug is an upgraded version of the Tattu Pro series, designed for 10–20L heavy-duty agricultural UAVs and mainstream 14S platforms. It meets the demands of frequent, high-load operations in challenging environments.
With a 22Ah capacity, its new cell formulation delivers higher energy density, providing more power within limited weight and space. Its output is optimized for heavy loads and high temperatures, supporting stable full-load takeoff and continuous operation.
Fast charging and extended cycle life help shorten turnaround time and reduce battery replacement frequency. These upgrades help fleets operate more efficiently and reliably while lowering long-term operating costs.
Video
Key Features
- Stable Under Full Load. Steady in the Heat.
New cell chemistry and low internal resistance support up to 6C continuous discharge for stable power under heavy loads. Discharge time is extended by 40 seconds, while temperature rise is reduced by 4°C. - 9-Minute Full Charge
110A 5C fast charging supports battery temperatures up to 75°C, with a full charge in approximately 9 minutes using TA7200PRO. - 1000+ Cycle Life
Upgraded cell materials and BMS algorithms deliver 1000+ cycles, helping reduce battery replacements and long-term operating costs. - Smart App Connectivity
Access battery data and firmware updates through the Tattu APP, simplifying routine checks and multi-battery fleet management. - Upgraded Intelligent BMS
An optimized BMS sleep strategy reduces standby consumption and helps lower the risk of over-discharge during storage. - Easier to Use. More Durable.
- The battery housing features enhanced water and corrosion resistance in key areas.
- High-density braided discharge leads offer improved resistance to abrasion and wear.
- The Type-C port enables direct computer connection for data access and firmware updates, even at 0% SOC.
- The RGB indicator provides clear battery status and health information at a glance.
Specifications:
- Minimum Capacity: 22000mAh
- Configuration: 14S1P
- Nominal Voltage: 53.2V
- Power: 1170.4Wh
- Net Weight(±200g): 6600g
- Dimensions: 253x163x90mm
- Discharge Plug: AS150U-F plug
- Max Continuous Discharge Current: 110A
- Max Pulse Discharge Current: 150A
Recommended Chargers
Tattu TA7200PRO — High Power · Fast Turnaround
Tattu TA3200 — More Economical · Portable
Explore Tattu Pro Max
Discover more about the Tattu Pro Max series and its key features on our product feature page: Tattu Pro Max.
Our Advantage:
1. Your orders will be dispatched via FedEx from the USA directly.
2. Fast shipping and excellent local after-sale service guaranteed in the USA.
3. Service-priority in the online shop, like the long warranty period and the lower price. We do offer a 90-day-warranty after your order date.
4. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously.
5. Low IR: Provides stable voltage until the end of your mission.
6. Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.
7. See the battery instruction to the link: Lipo Battery Guide.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Not Find You Need? Try Our Customized Service; Professional Customized of UAV Drone Batteries and Battery Solutions.
| Brand: | TATTU |
| Capacity(mAh): | 22000 |
| Voltage(V): | 53.2 |
| Configuration: | 14S1P |
| Discharge Rate (C): | 25C |
| Length(±5mm): | 166 |
| Width(±2mm): | 110 |
| Height(±2mm): | 253 |
| Net Weight(±100g): | 6600g |
| Series: | Tattu Pro Max |
| Capacity Range(mAh): | 20000-29999 |
| Connector Type: | AS150 |