Gens ace 5300mAh 11.1V 60C 3S1P HardCase Lipo Battery is designed for your RC cars with serious performance in mind. The hard protective case gives the battery well protected no matter you are crawling, bashing or racing.
Features:
Stable automatic stacking technology enables single-cell capacities of 5600mAh.
Superior cell matched the consistency.
Automatic production line to guarantee high quality and consistent performance
Gens Ace batteries provide high quality, reliable power for your Rc models.
Local after-sales service(located in Livermore, CA)
Specifications:
- Minimum Capacity: 5300mAh
- Configuration: 3S1P / 11.1V / 3Cell
- Discharge Rate: 60C
- Net Weight(±20g): 406
- Dimensions: 138mm Length x 46mm Width x 38mm Height
- Balancer Connector Type:JST-XHR-4P
Application:
Gens ace 5300mAh 11.1V 60C 3S1P HardCase Lipo Batteries are compatible with most models of ARRMA, Aquacraft, Associated, Axial, Duratrax, ECX, Exceed, HPI, Helion, Hot Bodies, Kyosho, Losi, Ofna, Pro Boat, Schumacher, TEAM DURANGO, Traxxas, Vaterra,Redcat Racing Gen 8, Super Baja Rey.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please go to www.P65Warnings.ca.gov.
About arrma BIGROCK 4x4 3S BLX battery and GRANITE 4x4 BLX battery check the link above.
| Balancer Connector Type: | JST-XHR-4P |
| Brand: | Gens Ace |
| Capacity(mAh): | 5300 |
| Balancer Wire Length(mm): | 45 |
| Configuration: | 3S1P |
| Connector Type: | XT90-S |
| Discharge Rate (C): | 60 |
| Height(±2mm): | 38 |
| is featured product: | No |
| Length(±5mm): | 138 |
| Max Burst discharge Rate (C): | 100 |
| Net Weight(?¨¤20g): | 406 |
| Over 300wh: | No |
| Preorder config: | No |
| Voltage(V): | 11.1 |
| Width(?¨¤2mm): | 46 |
| Wire Gauge: | 12# |
| Discharge Wire Length(mm): | 100 |
| Quantity per box: | 16pcs/box |
| Capacity Range(mAh): | 3000-5999 |