TATTU is a popular battery for drones, The Tattu 25000mAh 6S 22.8V 10C LiPO battery pack with XT90 plug professional aerial photography equipment. Less is more as the slogan: the single cell is 25000mAh, each cell connected in series, it is less in the whole industry, but TATTU is committed to providing more clients the perfect flight experience, no matter in the field of aerial photography, aerial video, aerial mapping, aerial inspections, agriculture, etc.
Features:
- Anti-spark
- Stable automatical stacking technology
- The most strict single cell capacity, voltage, resistance, discharge curve matching process
- Superior Japan and Korea Lithium Polymer raw materials
- Almost 200Wh/kg energy density
- At least 150 times cycle life
- Local after-sales service(located in Dublin, CA)
Specifications:
- Minimum Capacity: 25000mAh
- Configuration: 6S / 22.8V / 6 cells
- Discharge Rate: 10C
- Net Weight(±20g): 2577g
- Dimensions: 207mm Length x 91mm Width x 65mm Height
- Balancer Connector Type: JST-XHR-7P
Chargers:
Recommended use of the Tattu matching charger: TA1000
Tattu TA1000 G-Tech Dual-Channel Charger 25A*2 1000W For 1S-7S Drone Battery
Check for more Tattu UAV/Drone Chargers.
Our Advantage:
1. Your orders will be dispatched via FedEx or UPS from the USA directly.
2. Fast shipping and excellent local after-sale service guaranteed in the USA.
3. Service-priority in the online shop, like the long warranty period and the lower price.
4. Energy Density: Specially adapted to each UAV type and RC car/boat/helicopter type. Very High according to capacity/weight. In fact, we are specialists in High Power Lipo Batteries. It is our unique technology, the highest power of our battery is 100C. Another technology is our batteries are able to be stably discharged simultaneously.
5. Low IR: Provides stable voltage until the end of your mission.
6. Safety: Gens Ace and its' partners fulfill the ISO9001, ISO14001, standards.
7. See the battery instruction to the link: Lipo Battery Guide.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
| Balancer Connector Type: | JST-XHR-7P |
| Brand: | Tattu |
| Capacity(mAh): | 25000 |
| Balancer Wire Length(mm): | 65 |
| Configuration: | 6S1P |
| Connector Type: | XT90-S |
| Discharge Rate (C): | 10 |
| Height(±2mm): | 65 |
| is featured product: | No |
| Length(±5mm): | 207 |
| Max Burst discharge Rate (C): | 20 |
| Net Weight(±20g): | 2577 |
| Over 300wh: | Yes |
| Preorder config: | No |
| Voltage(V): | 22.8 |
| Width(±2mm): | 91 |
| Wire Gauge: | 8# |
| Discharge Wire Length(mm): | 150mm |
| Capacity Range(mAh): | 10000-49999 |
| Manual: | HV-LT-UAV.pdf |
| Amount: | 6pcs/Box |
